* : If equipped

This feature automatically adjusts the positions of the driver’s seat to make entering and exiting the vehicle easier to suit your preferences.
When My Settings is turned on:
Up to 2 different driving positions can be recorded for each the driver and guest that have been registered for My Settings.
When electronic key assignment is registered for My Settings, the driving position for each driver can be recalled (memory recall function).
When My Settings is turned off:
Up to 2 different driving positions can be recorded.
Each electronic key can be registered to recall your preferred driving position (memory recall function).
For details about My Settings, refer to (Click Here).

Enabling easier driver entry and exit (power easy access system)

When all of the following have been performed, the driver’s seat is automatically adjusted to a position that allows driver to enter and exit the vehicle easily.

• The shift lever has been shifted to P.
• The power switch has been turned to OFF.
• The driver’s seat belt has been unfastened.
  When any of the following has been performed, the driver’s seat automatically return to their original positions.
• The power switch has been turned to ACC or ON.
• The driver’s seat belt has been fastened.

∎ Operation of the power easy access system

When exiting the vehicle, the power easy access system may not operate if the seat is already close to the rearmost position, etc.

∎ Jam protection function

While the power easy access system is operating, if an object is stuck behind the front seat, the front seat will stop and then slightly move the opposite direction. When the jam protection function operates, the seat stops at a position other than the set seat position. Check the seat position.

∎ Customization

The seat movement amount settings of the power easy access system can be customized. (Customizable features:(Click Here))

Recording/recalling a driving position

∎ Recording procedure

• Check that the shift lever is in P.
• Turn the power switch to ON.
• Adjust the driver’s seat to the desired positions.
• While pressing the “SET” button, or within 3 seconds after the “SET” button is pressed, press button “1” or “2” until the buzzer sounds.

If the selected button has already been preset, the previously recorded position will be overwritten.

∎ Recall procedure

• Check that the shift lever is in P.
• Turn the power switch to ON.
• Press one of the buttons for the driving position you want to recall until the buzzer sounds.

∎ To stop the position recall operation part-way through

Perform any of the following:

• Press the “SET” button.
• Press button “1” or “2”
• Operate any of the seat adjustment switches.

∎ Operating the driving position memory after turning the power switch to OFF

Recorded seat positions can be activated up to 180 seconds after the driver’s door is opened and another 60 seconds after it is closed again.

∎ In order to correctly use the driving position memory function

If a seat position is already in the furthest possible position and the seat is operated in the same direction, the recorded position may be slightly different when it is recalled.

∎ When recalling the driving position

Take care when recalling the driving position so that the head restraint does not touch the ceiling.

∎ When the recorded seat position cannot be recalled

The seat position may not be recalled in some situations when the seat position is recorded in a certain range. For details, contact your Toyota dealer.

Recalling a driving position automatically when getting in the vehicle (memory recall function)

∎ When My Settings is turned on:

The driving positions can be automatically recalled for each registered driver by registering electronic key assignments in My Settings.

• Driving position registration procedure
  When the shift lever is shifted to P after driving the vehicle, the current driving position will be recorded.
• Driving position recall procedure
1. Carry only the key that has been assigned and registered in My Settings, and then unlock and open the driver’s door using the smart entry & start system or wireless remote control.
   The driving position will move to the recorded position. However, the seat will move to a position slightly behind the recorded position in order to make entering the vehicle easier.
   If the driving position is in a position that has already been recorded, the driving position will not move.
2. Turn the power switch to ACC or ON.
   The seat will move to the recorded position.
• Memory recall function cancelation procedure
  Initialize the driver registered settings in My Settings (Click Here)

∎ When My Settings is turned off:

Each electronic key can be registered to automatically recall your preferred driving position.

• Driving position registration procedure
  Record your driving position to button “1” or “2” before performing the following:
  Carry only the key you want to register, and then close the driver’s door.
  If 2 or more keys are in the vehicle, the driving position cannot be recorded properly.
1. Check that the shift lever is in P.
2. Turn the power switch to ON.
3. Recall the driving position that you want to record.
4. While pressing the recalled button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds.
   If the button could not be registered, the buzzer sounds continuously for approximately 3 seconds.

• Driving position recall procedure
1. Make sure that the doors are locked before recalling the driving position. Carry the electronic key that has been registered to the driving position, and then unlock and open the driver’s door using the smart entry & start system or wireless remote control.
   The driving position will move to the recorded position. However, the seat will move to a position slightly behind the recorded position in order to make entering the vehicle easier.
   If the driving position is in a position that has already been recorded, the seat will not move.
2. Turn the power switch to ACC or ON, or fasten a seat belt.
   The seat will move to the recorded position.
• Memory recall function cancelation procedure
  Carry only the key you want to cancel and then close the driver’s door.
  If 2 or more keys are in the vehicle, the driving position cannot be canceled properly.
1. Check that the shift lever is in P.
2. Turn the power switch to ON.
3. While pressing the “SET” button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds twice.
   If the button could not be canceled, the buzzer sounds continuously for approximately 3 seconds.

∎ Recalling the driving position using the memory recall function

• Different driving positions can be registered for each electronic key. Therefore, the driving position that is recalled may be different depending on the key being carried.
• If a door other than the driver’s door is unlocked with the smart entry & start system, the driving position cannot be recalled. In this case, press the driving position button which has been set.